Source code for scenarioFormationReconfig

#
#  ISC License
#
#  Copyright (c) 2016, Autonomous Vehicle Systems Lab, University of Colorado at Boulder
#
#  Permission to use, copy, modify, and/or distribute this software for any
#  purpose with or without fee is hereby granted, provided that the above
#  copyright notice and this permission notice appear in all copies.
#
#  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
#  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
#  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
#  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
#  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
#  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#


r"""
Overview
--------
This script sets up a formation flying scenario with two spacecraft.
The deputy spacecraft reconfigures its relative orbit in one orbit from one initial orbital element difference to
target orbital element difference.
This script is found in the folder ``basilisk/examples`` and executed by using::

      python3 scenarioFormationReconfig.py

The simulation layout is shown in the following illustration.
Two spacecraft are orbiting the earth at close distance. No perturbation in assumed.
Each spacecraft sends a :ref:`simpleNav` output message of type :ref:`NavAttMsgPayload` message at a certain period
to :ref:`spacecraftReconfig`,
where burn scheduling is executed to achieve reconfiguration.

.. image:: /_images/static/test_scenarioFormationReconfig.svg
    :align: center

Illustration of Simulation Results
----------------------------------
::

    show_plots = True, useRefAttitude = False

In this case, reference attitude input is omitted.
Therefore, attitude control is executed to achieve thruster burn.
This resulting feedback control error is shown below.

.. image:: /_images/Scenarios/scenarioFormationReconfig10.svg
   :align: center

.. image:: /_images/Scenarios/scenarioFormationReconfig20.svg
   :align: center

::

    show_plots = True, useRefAttitude = False

In this case, reference attitude input is included.
Therefore, attitude control is executed to both achieve thruster burn and reference attitude.
This resulting feedback control error is shown below.

.. image:: /_images/Scenarios/scenarioFormationReconfig11.svg
   :align: center

.. image:: /_images/Scenarios/scenarioFormationReconfig21.svg
   :align: center
"""


import itertools
import math
import os

import matplotlib.pyplot as plt
import numpy as np
from Basilisk import __path__
from Basilisk.architecture import messaging
from Basilisk.architecture import astroConstants
from Basilisk.fswAlgorithms import attTrackingError
from Basilisk.fswAlgorithms import inertial3D
from Basilisk.fswAlgorithms import mrpFeedback
from Basilisk.fswAlgorithms import spacecraftReconfig
from Basilisk.simulation import extForceTorque
from Basilisk.simulation import simpleNav
from Basilisk.simulation import spacecraft
from Basilisk.simulation import thrusterDynamicEffector
from Basilisk.utilities import SimulationBaseClass
from Basilisk.utilities import fswSetupThrusters
from Basilisk.utilities import macros
from Basilisk.utilities import orbitalMotion
from Basilisk.utilities import simIncludeGravBody
from Basilisk.utilities import simIncludeThruster
from Basilisk.utilities import unitTestSupport
from Basilisk.utilities import vizSupport

bskPath = __path__[0]
fileName = os.path.basename(os.path.splitext(__file__)[0])


[docs] def run(show_plots, useRefAttitude): """ At the end of the python script you can specify the following example parameters. Args: show_plots (bool): Determines if the script should display plots useRefAttitude (bool): Determines if reference attitude is used """ scSim = SimulationBaseClass.SimBaseClass() # ----- dynamics ----- # dynProcessName = "dynProcess" dynTaskName = "dynTask" dynProcess = scSim.CreateNewProcess(dynProcessName) timeStep = 2.0 dynTimeStep = macros.sec2nano(timeStep) dynProcess.addTask(scSim.CreateNewTask(dynTaskName, dynTimeStep)) # sc scObject = spacecraft.Spacecraft() scObject2 = spacecraft.Spacecraft() scObject.ModelTag = "scObject" scObject2.ModelTag = "scObject2" I = [900., 0., 0., 0., 800., 0., 0., 0., 600.] scObject.hub.mHub = 500.0 scObject.hub.r_BcB_B = [[0.0], [0.0], [0.0]] scObject.hub.IHubPntBc_B = unitTestSupport.np2EigenMatrix3d(I) scObject2.hub.mHub = 500.0 scObject2.hub.r_BcB_B = [[0.0], [0.0], [0.0]] scObject2.hub.IHubPntBc_B = unitTestSupport.np2EigenMatrix3d(I) scSim.AddModelToTask(dynTaskName, scObject, 2) scSim.AddModelToTask(dynTaskName, scObject2, 2) # grav gravFactory = simIncludeGravBody.gravBodyFactory() earth = gravFactory.createEarth() earth.isCentralBody = True mu = earth.mu gravFactory.addBodiesTo(scObject) gravFactory.addBodiesTo(scObject2) # thruster thrusterEffector2 = thrusterDynamicEffector.ThrusterDynamicEffector() scSim.AddModelToTask(dynTaskName, thrusterEffector2, 3) thFactory2 = simIncludeThruster.thrusterFactory() location = [[0.0, 0.0, 0.0], [0.0, 0.0, 0.0]] direction = [[1.0, 1.0, 1.0], [1.0, 1.0, 1.0]] # get thrust in +z direction for pos_B, dir_B in zip(location, direction): thFactory2.create('MOOG_Monarc_22_6', pos_B, dir_B, useMinPulseTime=False) thFactory2.addToSpacecraft(scObject2.ModelTag, thrusterEffector2, scObject2) # extObj extFTObject2 = extForceTorque.ExtForceTorque() extFTObject2.ModelTag = "externalDisturbance2" scObject2.addDynamicEffector(extFTObject2) scSim.AddModelToTask(dynTaskName, extFTObject2, 3) # simple nav simpleNavObject = simpleNav.SimpleNav() simpleNavObject2 = simpleNav.SimpleNav() simpleNavObject.scStateInMsg.subscribeTo(scObject.scStateOutMsg) simpleNavObject2.scStateInMsg.subscribeTo(scObject2.scStateOutMsg) scSim.AddModelToTask(dynTaskName, simpleNavObject, 1) scSim.AddModelToTask(dynTaskName, simpleNavObject2, 1) # ----- fsw ----- # fswProcessName = "fswProcess" fswTaskName = "fswTask" fswProcess = scSim.CreateNewProcess(fswProcessName) fswTimeStep = macros.sec2nano(timeStep) fswProcess.addTask(scSim.CreateNewTask(fswTaskName, fswTimeStep)) # VehicleConfigFswMsg vehicleConfigOut2 = messaging.VehicleConfigMsgPayload() vehicleConfigOut2.ISCPntB_B = I vehicleConfigOut2.massSC = scObject2.hub.mHub vcMsg = messaging.VehicleConfigMsg().write(vehicleConfigOut2) # inertial 3D target attitude inertial3DObj = inertial3D.inertial3D() inertial3DObj.ModelTag = "inertial_3D2" inertial3DObj.sigma_R0N = [1.0, 0.0, 0.0] scSim.AddModelToTask(fswTaskName, inertial3DObj, 11) # thrusterConfigMsg fswSetupThrusters.clearSetup() for key, th in thFactory2.thrusterList.items(): loc_B_tmp = list(itertools.chain.from_iterable(th.thrLoc_B)) dir_B_tmp = list(itertools.chain.from_iterable(th.thrDir_B)) fswSetupThrusters.create(loc_B_tmp, dir_B_tmp, th.MaxThrust) fswThrConfMsg = fswSetupThrusters.writeConfigMessage() # spacecraftReconfig spacecraftReconfigModule = spacecraftReconfig.spacecraftReconfig() spacecraftReconfigModule.ModelTag = "spacecraftReconfig" spacecraftReconfigModule.chiefTransInMsg.subscribeTo(simpleNavObject.transOutMsg) spacecraftReconfigModule.deputyTransInMsg.subscribeTo(simpleNavObject2.transOutMsg) if useRefAttitude: spacecraftReconfigModule.attRefInMsg.subscribeTo(inertial3DObj.attRefOutMsg) spacecraftReconfigModule.thrustConfigInMsg.subscribeTo(fswThrConfMsg) spacecraftReconfigModule.vehicleConfigInMsg.subscribeTo(vcMsg) thrusterEffector2.cmdsInMsg.subscribeTo(spacecraftReconfigModule.onTimeOutMsg) spacecraftReconfigModule.mu = astroConstants.MU_EARTH*1e9 # [m^3/s^2] spacecraftReconfigModule.attControlTime = 400 # [s] spacecraftReconfigModule.targetClassicOED = [0.0000, 0.0001, 0.0002, -0.0001, -0.0002, -0.0003] scSim.AddModelToTask(fswTaskName, spacecraftReconfigModule, 10) # att_Error attError = attTrackingError.attTrackingError() attError.ModelTag = "attError" scSim.AddModelToTask(fswTaskName, attError, 9) attError.attRefInMsg.subscribeTo(spacecraftReconfigModule.attRefOutMsg) attError.attNavInMsg.subscribeTo(simpleNavObject2.attOutMsg) # MRP_FeedBack mrpControl = mrpFeedback.mrpFeedback() mrpControl.ModelTag = "mrpFeedback" scSim.AddModelToTask(fswTaskName, mrpControl, 8) mrpControl.guidInMsg.subscribeTo(attError.attGuidOutMsg) mrpControl.vehConfigInMsg.subscribeTo(vcMsg) extFTObject2.cmdTorqueInMsg.subscribeTo(mrpControl.cmdTorqueOutMsg) mrpControl.K = 10 mrpControl.Ki = 0.0002 mrpControl.P = 50.0 mrpControl.integralLimit = 2. / mrpControl.Ki * 0.1 # ----- Setup spacecraft initial states ----- # oe = orbitalMotion.ClassicElements() oe.a = 11000*1e3 # meters oe.e = 0.4 oe.i = 60.0 * macros.D2R oe.Omega = 90 * macros.D2R oe.omega = 60 * macros.D2R M = 40 * macros.D2R E = orbitalMotion.M2E(M, oe.e) oe.f = orbitalMotion.E2f(E, oe.e) rN, vN = orbitalMotion.elem2rv(mu, oe) orbitalMotion.rv2elem(mu, rN, vN) scObject.hub.r_CN_NInit = rN # m scObject.hub.v_CN_NInit = vN # m/s scObject.hub.sigma_BNInit = [[0.0], [0.0], [0.0]] # sigma_BN_B scObject.hub.omega_BN_BInit = [[0.0], [0.0], [0.0]] # rad/s - omega_BN_B oe2 = oe oe2.a = (1 + 0.0003)*oe2.a oe2.e = oe2.e - 0.0002 oe2.i = oe2.i + 0.0001 oe2.Omega = oe2.Omega + 0.0004 oe2.omega = oe2.omega - 0.0001 M2 = M + 0.0002 E2 = orbitalMotion.M2E(M2, oe.e) oe2.f = orbitalMotion.E2f(E2, oe.e) rN2, vN2 = orbitalMotion.elem2rv(mu, oe2) scObject2.hub.r_CN_NInit = rN2 # m scObject2.hub.v_CN_NInit = vN2 # m/s scObject2.hub.sigma_BNInit = [[0.0], [0.0], [0.0]] # sigma_BN_B scObject2.hub.omega_BN_BInit = [[0.0], [0.0], [0.0]] # rad/s - omega_BN_B # ----- log ----- # orbit_period = 2*math.pi/math.sqrt(mu/oe.a**3) simulationTime = orbit_period*1.1 simulationTime = macros.sec2nano(simulationTime) numDataPoints = 1000 samplingTime = unitTestSupport.samplingTime(simulationTime, dynTimeStep, numDataPoints) dataLog = scObject.scStateOutMsg.recorder(samplingTime) dataLog2 = scObject2.scStateOutMsg.recorder(samplingTime) attRefLog = spacecraftReconfigModule.attRefOutMsg.recorder(samplingTime) thrCmdLog = spacecraftReconfigModule.onTimeOutMsg.recorder(samplingTime) attErrLog = attError.attGuidOutMsg.recorder(samplingTime) scSim.AddModelToTask(dynTaskName, dataLog) scSim.AddModelToTask(dynTaskName, dataLog2) scSim.AddModelToTask(dynTaskName, attRefLog) scSim.AddModelToTask(dynTaskName, thrCmdLog) scSim.AddModelToTask(dynTaskName, attErrLog) # if this scenario is to interface with the BSK Viz, uncomment the following lines # to save the BSK data to a file, uncomment the saveFile line below viz = vizSupport.enableUnityVisualization(scSim, dynTaskName, [scObject, scObject2] # , saveFile=fileName ) # ----- execute sim ----- # scSim.InitializeSimulation() scSim.ConfigureStopTime(simulationTime) scSim.ExecuteSimulation() # ----- pull ----- # pos = dataLog.r_BN_N vel = dataLog.v_BN_N pos2 = dataLog2.r_BN_N vel2 = dataLog2.v_BN_N attErr = attErrLog.sigma_BR timeData = dataLog.times()*macros.NANO2SEC/orbit_period # ----- plot ----- # # classic orbital element difference (figure1) plt.figure(1) oed = np.empty((len(pos[:, 0]), 6)) for i in range(0, len(pos[:, 0])): oe_tmp = orbitalMotion.rv2elem(mu, pos[i], vel[i]) oe2_tmp = orbitalMotion.rv2elem(mu, pos2[i], vel2[i]) oed[i, 0] = (oe2_tmp.a - oe_tmp.a)/oe_tmp.a oed[i, 1] = oe2_tmp.e - oe_tmp.e oed[i, 2] = oe2_tmp.i - oe_tmp.i oed[i, 3] = oe2_tmp.Omega - oe_tmp.Omega oed[i, 4] = oe2_tmp.omega - oe_tmp.omega E_tmp = orbitalMotion.f2E(oe_tmp.f, oe_tmp.e) E2_tmp = orbitalMotion.f2E(oe2_tmp.f, oe2_tmp.e) oed[i, 5] = orbitalMotion.E2M(E2_tmp, oe2_tmp.e) - orbitalMotion.E2M(E_tmp, oe_tmp.e) for j in range(3, 6): if(oed[i, j] > math.pi): oed[i, j] = oed[i, j] - 2*math.pi if(oed[i, j] < -math.pi): oed[i, j] = oed[i, j] + 2*math.pi plt.plot(timeData, oed[:, 0], label="da") plt.plot(timeData, oed[:, 1], label="de") plt.plot(timeData, oed[:, 2], label="di") plt.plot(timeData, oed[:, 3], label="dOmega") plt.plot(timeData, oed[:, 4], label="domega") plt.plot(timeData, oed[:, 5], label="dM") plt.legend() plt.xlabel("time [orbit]") plt.ylabel("orbital element difference") figureList = {} pltName = fileName + "1" + str(int(useRefAttitude)) figureList[pltName] = plt.figure(1) # attitude control error (figure2) plt.figure(2) plt.plot(timeData, attErr[:, 0]) plt.plot(timeData, attErr[:, 1]) plt.plot(timeData, attErr[:, 2]) plt.xlabel("time [orbit]") plt.ylabel("MRP Error") pltName = fileName + "2" + str(int(useRefAttitude)) figureList[pltName] = plt.figure(2) if(show_plots): plt.show() plt.close("all") return pos, vel, pos2, vel2, attErr, numDataPoints, figureList
if __name__ == "__main__": run( show_plots = True, # show_plots useRefAttitude = False # useRefAttitude )